- This topic has 2 replies, 3 voices, and was last updated 2 years, 4 months ago by
garyssat.
Viewing 3 posts - 1 through 3 (of 3 total)
-
AuthorPosts
-
April 13, 2022 at 10:34 pm #13557
dafydd1
ParticipantIs there an easy trick to checking on the nutrient level in your patio gardens?
Once it is assembled, it’s kind of hard to get at the reservoir to check the level.
Any suggestions?
Thanks,
David George
July 4, 2022 at 4:24 pm #14226Joe Young
ParticipantI bought two grommets and a length of clear hose. I drilled a hole in the top and in the bottom of the reservoir inserted the grommets and then inserted the hose into the grommets. You can see a water level at a glance now.
October 2, 2022 at 7:07 pm #15043garyssat
ParticipantI used a couple 1/4 ” 90deg nylon fittings one at the top and one at bottom with clear tubing between the 2 fittings ..I did tap the container and screw the fittings in and sealed with some monster epoxy..I have a pic of what I did if I could or knew how to upload..
-
AuthorPosts
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.